Speciální snímače pro imerzi označují různé snímače, které vykonávají mnoho rozličných úkonů, jako je například měření tloušťky stěny, kontrola hliníkového povlaku nebo detekce vad s využitím technologie array s větším počtem prvků. Tato skupina zahrnuje následující typy snímačů: pouzdro s postranním otvorem, paintbrush, snímače typu i-R a XMS.
Ideal for measuring wall thicknesses of pipe where access to the outer diameter is limited
Small outer diameter allows for greater accessibility in tight spaces than standard immersion transducers with reflector mirrors
Sound exit point is located at a 90° angle relative to the straight Microdot ® connector
Probe extensions such as the F211 are available to lengthen the standard design
Part
Numbers
Freq.
Nominal
Element Size
Focus
MHz
inches
mm
inches
V3591
10
0.125
3
0.50 OLF
V3343
20
0.125
3
0.50 OLF
Note: All above side looking immersion transducers have straight Microdot connectors.
Paintbrush
Accuscan Paintbrush
Large scanning index is ideal for inspections of aluminum or steel plate
Sensitivity uniformity of better than ±1.5 dB is maintained across the transducer face (sensitivity peaks at the edges are also controlled)
Transducer Dimensions (in inches)
Nominal Element Size
(A)
(B)
(C)
2.00 x 0.25
0.82
0.75
2.50
1.50 x 0.25
0.82
0.75
2.00
For 7.5 MHz and 10 MHz, case height (A) is 0.62"
Transducer Configurator
*Please select a specific focus between min max.
**If a focus is required, select a focal length between min max
To view point target foci, click here.
Request a quote or purchase a transducer by selecting the item number.
Immersion Transducer, 2.25 MHz, 2.00 in. x 0.25 in. Element Size, Paintbrush Case Style, Straight UHF Connector Includes Test Form CertificateBuy NowBuy NowRequest a Quote
XMS
Extra Miniature (XMS) Transducer
The XMS transducer is an extremely small 10 MHz immersion transducer with a 3 mm (0.118") diameter by 3 mm (0.118") long case. This transducer is ideal for extremely tight access areas or for multi-element array flaw detection. The transducer assembly has a special connector attached to the 1 m (38") long potted cable. An adaptor is also available to interface with most commercial ultrasonic equipment.
Frequency
Nominal Element Size
Part Number
Included Adapter
MHz
inches
mm
10
.080
2
XMS-310-B
BNC
10
.080
2
XMS-310-L
Lemo ® 01
i-R Style
i-R Style Housings
0.50 inches (10 mm) element diameters in 0.75 inches (19 mm) x 0.75 inches (19 mm) rectangular housings with side mount (right angle), UHF connectors, and 303 stainless steel case housings are available.
Transducer Configurator
*To view transducer point target focus, click here.
Request a quote or purchase a transducer by selecting the item number.
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
