Startseite/ Produkte/ Prüfgeräte / Phased-Array-Prüfgeräte/ Bindungsprüfung/ BondMaster-Sonden

Beachten Sie, dass die Produktverfügbarkeit landes-/regionsabhängig ist. Für weitere Informationen kontaktieren Sie Ihren zuständigen Olympus Händler.

Loading...

Overview
Probes
Cables
Probe Tip Replacement Procedures
Replacement Tips

Overview

Features

Ideal for honeycomb composite skin-to-core disbonds.
High sensitivity and crisp signal and response.
Detects near side and far side defects in most applications.
Compatible with pitch-catch RF, IMPULSE or SWEPT methods.
Ergonomic design and easy configurations.
No couplant required.

Pitch-Catch Probe Applications

S-PC-P14

Order number: 9323945 (U8800601)

Specifications

Operation mode: Pitch-Catch
Frequency: Broadband
Tips: Spacing 14 mm (0.55 in.)
Ergonomic design

General-purpose, broadband pitch-catch probe with ergonomic design featuring 4 feet and probe tips at the edge of the probe. Allows easy scanning of any flat or large radius curved surface. The tips placed at the probe's edge allow for stable edge testing of parts. This is the preferred probe model used on most composite honeycomb inspections.

S-PC-P16

Order number: 9323952 (U8010062)

Specifications

Operation mode: Pitch-Catch
Frequency: Broadband
Tips: Spacing 14 mm (0.55 in.)

Broadband pitch-catch probe with ergonomic design feature probes inside the 4 feet for easy inspection over tighter part radii such as wing leading edges. Although intended for tighter radii, this probe will perform well on flatter composite homecomb structures.

SPO-5629-PHV

Order number: 9322184 (U8010039)

Specifications

Operation mode: Pitch-catch
Frequency: Broadband, high voltage
Tips: Spacing 12.7 mm (0.5 in.), spring-loaded tips

Broadband pitch-catch probe with smaller footprint and elongated body, meant to be used in tighter access areas. This probe generally shows slighty more sensitivity to smaller defects than the S-PC-P14 or S-PC-P16 models, due to its closer tips. Although not as stable as the S-PC-P14 or S-PC-P16 on flat surfaces, the use of the SPO-5629-PHV in the friction holder SPO-5629-H-R1 can simplify the inspection of honeycomb composites.

SPO-5629-H-R1

Order number: SPO-5629-H-R1 (U8780312)

Designed for use with SPO-5629PHV probe. Enhances stability while keeping the probe perpendicular to the inspection surface, and adding the ability to have stand-off from the surface of the test part to alter the tension of the active tips to the test surface.

Probes

Pitch-Catch Probes

Bondmaster Probes	U8 Number	Mode	Frequency	Tip Spacing/Element Diameter
S-PC-P14	U8800601	Pitch-Catch	Broadband	14 mm
S-PC-P16	U8010062	Pitch-Catch	Broadband	14 mm
SPO-5629-PHV	U8010039	Pitch-Catch	Broadband, High Voltage	12.7 mm
SPO-5629-H-R1	U8780312	Pitch-Catch	N/A	N/A
S-PC-P1	U8770418	Pitch-Catch	Low	17 mm
S-PC-P2	U8880419	Pitch-Catch	Low	19 mm
S-PC-P11	U8010012	Pitch-Catch	Broadband	17 mm
S-PC-P12	U8770334	Pitch-Catch	Broadband	17 mm
S-PC-P13	U8770336	Pitch-Catch	Broadband, High Drive	17 mm
SPO-5629-P	U8770421	Pitch-Catch	Broadband	12.7 mm
S-PC-DHV	U8010054	Pitch-Catch	5.1 kHz to 12 kHz	Multiple (4x)

Legacy Probes

S-PC-P1

Order number: 9317812 (U8770418)

Specifications
Operation mode: Pitch-catch
Frequency: Low
Tips: Fixed tips, 17 mm (0.67 in.) spacing.
Detection capability: Typically 12.7 mm (0.5 in.) or larger

S-PC-P2

Order number: 9317854 (U8770419)

Specifications
Operation mode: Pitch-catch
Frequency: Low
Tips: Spring-loaded tips, 19 mm (0.75 in.) spacing.
Detection capability: Typically 12.7 mm (0.5 in.) or larger

S-PC-P11

Order number: 9317797 (U8010012)

Specifications
Operation Mode: Pitch-catch
Frequency: Broadband
Tips: Spring-loaded tips, 17mm (0.67 in.) spacing
Detection Capability: Typically 12.7 mm (05 in.) or larger

S-PC-P12

Order number: 9322074 (U8770336)

Specifications
Operation mode: Pitch-catch
Frequency: Broadband
Tips: Fixed tips, 17 mm (0.67 in.) spacing
Detection capability: Typically 12.7 mm (0.5 in.) or larger

S-PC-P13

Order number: 9322076 (U8770336)

Specifications
Operation mode: Pitch-catch
Frequency: Broadband, high-drive
Tips: Spring-loaded tips, 17 mm (0.67 in.) spacing
Detection capability: Typically 12.7 mm (0.5 in.) or larger

SPO-5629-P

Order number: 9318169 (8770421)

Specifications
Operation mode: Pitch-catch
Frequency: Broadband
Tips: Spring-loaded tips, 12.7 mm (0.5 in.) spacing
Detection capability: Typically 12.7 mm (0.5 in.) or larger

S-PC-DHV

Order number: 9323942 (U8800672)

Specifications
Operation mode: Pitch-catch
Frequency: 5.1 kHz for structures thicker than 25.4 mm; 6 kHz to 12 kHz for structures thinner than 25.4 mm
Pulse: Between 1 and 3
Tips: Four tips
Detection capability: Successful with a wide variety of materials, including plastics and wood laminates.

*DHV Cable: Requires SBM-CPM-DHV: 9122330 (U8800672) note: DHV cable will work all Pitch-Catch probes.

Cables

Legacy Cable

Part Number	U8 Number	Description
SBM-CPM-P11	U8800058	BondMaster Cable - SBM-CPM-P11 11 Pin to 11 Pin cable used on Pitch Catch and MIA probes. 11 foot (3.3 meters) length.

Probe Tip Replacement Procedures

Procedures for Replacing Probe Tips

Probe configurations include two fixed or spring-loaded active-probe tips, and three white-plastic stabilization tips. Frequent or inappropriate use will lead to deterioration of the tips. You can easily and quickly replace the tips with new ones by following the steps below.

1. Turn the probe and identify the tips that need to be replaced.

To replace the active probe tips.

1. With a pair of pliers or with your fingers, lightly grip the tips and pull them out of the probe.

2. Insert new active tips. You can use alcohol on the tips to make it easier to insert them into the probe.

To replace the problem stablization tips

1. It is important to replace the stability tips one by one. After unscrewing each tip (with pliers or with your hands), make sure that you replace the tip before removing the next one.

Replacement Tips

Pitch-Catch Stabilization and Active Replacement Probe Tips

Active Tips

Order Number	2319970	2319988	2320036	1817235
U8 Number	U8770316	U8770318	U8779378	U8770425
Description	Active Tips, Set of 2 tips, with O-rings	Mushroom shaped active tips, Set of 2 with O-rings	Teflon Mushroom shaped active tips, Set of 2 of O-rings	Active Tips
Fits S-PC-P2				X
Kit S-PC-P11	X	X	X
Fits S-PC-P13	X	X	X
Fits S-PC-P14	X	X	X
Fits S-PC-P16	X	X	X
Fits SPO-5629-PHV	X	X	X
Fits S-PC-DHV	X	X	X

Stabilization Tips

Order Number	2316836	2317768	2320030	2320000	2320037
U8 Number	U8906277	U8770312	U8010056	U8770320	U8779513
Description	Stabilization tips	Probe Tips, Chisel	Stabilization tips, set of 3	Stabilization tips, set of 3	Replacment stabilization tips for S-PC-P16
Fits S-PC-P1	requires 3
Kits S-PC-P11		requires 3	X
Fits S-PC-P12				X
Fits S-PC-P13		requires 3	X
Fits S-PC-P14	requires 4
Fits S-PC-P16					requires 4
Fits S-PC-DHV	requires 4

Refurbishment Kit

Order Number	B1000-PK-02
U8 Number	U8770424
Description	Kit includes: 1 set Active Tips with O-rings; 1 set of Stabilization Tips
Kits S-PC-P11	X
Fits S-PC-P13	X

BondMaster Probe Accessories

3303965 (U8901365) Teflon Tape 1/4 inch.

3304920 (U8901366) Teflon Tape 1 inch.

Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

If you already have your personal ID enter it here:

If you already have your personal ID enter it here:

Pitch-Catch Probes

Overview

Features

Pitch-Catch Probe Applications

S-PC-P14

S-PC-P16

SPO-5629-PHV

SPO-5629-H-R1

Probes

Pitch-Catch Probes

Legacy Probes

S-PC-P1

S-PC-P2

S-PC-P11

S-PC-P12

S-PC-P13

SPO-5629-P

S-PC-DHV

Cables

Legacy Cable

Probe Tip Replacement Procedures

Procedures for Replacing Probe Tips

To replace the active probe tips.

To replace the problem stablization tips

Replacement Tips

Pitch-Catch Stabilization and Active Replacement Probe Tips

Active Tips

Stabilization Tips

Refurbishment Kit

BondMaster Probe Accessories

Kontakt

Redirecting...