S-MP-3

Specifications 
Operation mode: MIA
Probe design: Right angle probe, requires BMM-H for spring loading
Tips: 12.7 mm (0.5 in.) tip diameter
Detection capability: Detects defects in graphite-composite skin bonded to Nomex honeycomb; 2-ply through 7-ply skin thickness. Defects sized 25.4 mm by 50.8 mm; 2-ply through 18-ply. Defect size of 12.7 mm (0.5 in.) or larger.

Typical Applications 

• Can be used on irregular or curved surfaces
• Suitable for detecting skin-to-core disbonds, crushed core, and other typical skin-to-core bondline defects.
• Suitable for continuous or mechanical scanning by using spring loading or constant pressure on the probe tip.

S-MP-4

Specifications  
Operation mode: MIA
Probe design: Right angle probe, requires BMM-H for spring loading
Tips: 6.35 mm (0.25 in.) tip diameter
Detection capability: Detects on metal to metal defects up to 2 mm (0.08 in.) thickness in the bondline, 6.35 mm (0.25 in.) defect size or larger; and on Fiberglass bonded to a foam core, defect size of 12.7 mm (0.5 in.) or larger, and a maximum skin thickness of 6.35 mm (0.25 in.).

Typical Applications

• Can be used on irregular or curved surfaces
• Suitable for detecting skin-to-core disbonds, crushed core, and other typical skin-to-core bondline defects.
• Suitable for continuous or mechanical scanning by using spring loading or constant pressure on the probe tip.

S-MP-5

Specifications 
Operation mode: MIA
Probe design: Right angle probe, adjustable spring tension
Tips: 12.7 mm (0.50 in.) tip diameter
Detection capability: Internally spring-loaded three-position tension adjustments for greater consistency and accuracy. Especially well suited for overhead inspections. Features removable Delrin wear shoe.

Typical Applications

• Can be used on irregular or curved surfaces
• Suitable for detecting skin-to-core disbonds, crushed core, and other typical skin-to-core bondline defects.
• Suitable for continuous or mechanical scanning by using spring loading or constant pressure on the probe tip.

BMM-H Probe Housing

Typical Applications 
Designed for use with S-MP-03  and S-MP-4 probes. Ensures constant pressure is applied to the part. Also greatly enhances stability while keeping the probe perpendicular to the inspection surface. Incorporates a Teflon wear shoe and spring-loaded probe holder.
 

S-MP-1 
Order number: 9317806
Part number: U8010013

Specifications 
Operation mode: MIA 
Probe design: Right angle probe, not spring-loaded
Tips: 12.7 mm (0.5 in.) tip diameter
Detection capability: Detects defects in graphite-composite skin bonded to honeycomb.

Typical Applications

• Can be used on irregular or curved surfaces.
• Suitable for detecting skin-to-core disbonds, crushed core and other typical skin-to-core bondline defects.
• Used where access is limited.

S-MP-2 
Order number: 9317807
Part number: U8010014

Specifications 
Operation mode: MIA
Probe design: Straight probe, not spring-loaded
Tips: 6.35 mm (0.25 in.) tip diameter

Typical Applications

• Can be used on irregular or curved surfaces.
• Works well on disbonds, crushed core and bond defects on the inside walls of composite structures.
• Used where access is limited.