Knowledge

Applications

Home/ Ultrasound/ Applications

Ultrasound Applications

Alloys

COOEC Launches a New Era of Quality Control for Ocean Engineering in China

Normal Incidence Shear Wave Transducers

TOFD for Weld Root Corrosion and Erosion

Ultrasonic Inspection of Babbitt Bearing Liners

Aluminum

Introduction to Time-of-Flight Diffraction (TOFD) for Weld Inspection

Measurement of the Layers in Clad Metal Cookware

Normal Incidence Shear Wave Transducers

Ultrasonic Testing of Aluminum and Nonferrous Castings

Wall Thickness Measurements for Metal Cans, Containers, and Enclosures

Castings

Automated nodularity evaluation of ductile iron castings by ultrasonic measurements

Manufacturing Cast Engine Blocks for Automobiles and Trucks

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Measuring Nodularity in Cast Iron Using Ultrasonic Testing

Measuring Thickness of Wax Molds for Precision Castings

Measuring Wall Thickness of Gun Drilled Metal

Normal Incidence Shear Wave Transducers

Ultrasonic Inspection of Babbitt Bearing Liners

Ultrasonic Testing in the Foundry Industry

Ultrasonic Testing of Aluminum and Nonferrous Castings

Ceramics

Cracking in Ceramic Diesel Particulate Filters

Measurements of Silicone Coatings on Porcelain High Voltage Insulators

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Measuring Thickness of Wax Molds for Precision Castings

Normal Incidence Shear Wave Transducers

Thickness Measurements and Flaw Detection of Ceramics

Composites

Aircraft Composite Inspection with 35RDC Ramp Damage Checker

Bond Testing in Composite Power Line Insulators

High-Speed Phased Array Ultrasound Inspection of Aerospace Composite Parts

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Nondestructive Bond Testing for Aircraft Composites

Thickness Measurement of Aerospace Composites

Fiberglass

Aircraft Composite Inspection with 35RDC Ramp Damage Checker

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Measuring Fiberglass Gelcoat Thickness

Thickness Gaging of Fiberglass Boat Hulls

Thickness Measurement of Aerospace Composites

Thickness Measurements of Fiberglass Plates, Pipes, and Storage Tanks

Glass

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Measuring the Thickness of Glass Products and Coatings

Gold

Raising the Bar For Gold Bullion Testing

General

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Ultrasonic Couplants

Iron

Measuring Nodularity in Cast Iron Using Ultrasonic Testing

Ultrasonic Testing of Aluminum and Nonferrous Castings

Liquid

Ultrasonic Measurements of Liquids

Metal

Braze Joint Testing

COOEC Launches a New Era of Quality Control for Ocean Engineering in China

Corrosion Thickness Gauging with Dual Element Transducers

Crevice Corrosion - Testing the Sealing Surface of Flanges

Defect Sizing in Pipeline Welds – What Can We Really Achieve?

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components - PDI UT-2: Austenitic Pipe Welds

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI UT-1: Ferritic Pipe Welds

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI UT-3: Through-Wall Sizing

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI-UT-4: Ultrasonic Examination of Bolts and Studs from the Bore

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI-UT-5: Straight Beam Ultrasonic Examination of Bolts and Studs

Guidelines for Automated Ultrasonic Inspection Austenitic Welds

High-Temperature Ultrasonic Testing

Introduction to Time-of-Flight Diffraction (TOFD) for Weld Inspection

Manufacturing Cast Engine Blocks for Automobiles and Trucks

Measurement of the Layers in Clad Metal Cookware

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Measuring Internal Oxide Scale in Boiler Tubes

Measuring Metal Thickness through Paint

Measuring Nodularity in Cast Iron Using Ultrasonic Testing

Measuring the Wall Thickness of Small-Diameter Metal and Plastic Tubing

Measuring the Wall Thickness of Steam Boiler Tubes with EMAT Transducers

Measuring the Wall Thickness of Turbine Blades

Measuring Wall Thickness of Gun Drilled Metal

Metal Coils Thickness Inspection

Normal Incidence Shear Wave Transducers

Oil Well Down Hole Drilling Tool Inspection

Phased Array Dipper Handle Inspection for Shovels and Draglines

TOFD for Weld Root Corrosion and Erosion

TOFD Parallel Scanning

Ultrasonic Inspection of Babbitt Bearing Liners

Ultrasonic Testing in the Foundry Industry

Ultrasonic Testing of Aluminum and Nonferrous Castings

Ultrasonic Thickness Measurements of Hot Metals

Wall Thickness Measurements for Metal Cans, Containers, and Enclosures

Wall Thickness Measurements of Metal Pipes and Tubes

Others

Automated nodularity evaluation of ductile iron castings by ultrasonic measurements

Effects of Long Cables in Ultrasonic Testing with Single Element Transducers

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components - PDI UT-2: Austenitic Pipe Welds

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI UT-1: Ferritic Pipe Welds

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI UT-3: Through-Wall Sizing

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI-UT-4: Ultrasonic Examination of Bolts and Studs from the Bore

EPRI PDI Qualification of EVIDENT Flaw Detectors and Probes for Ultrasonic In-Service Examination of Nuclear Plant Components—PDI-UT-5: Straight Beam Ultrasonic Examination of Bolts and Studs

Ultrasonic Couplants

Ultrasonic time-of-flight-diffraction (TOFD) examination of butt-fusion joints of high-density polyethylene (HDPE)

Plastic

Base Curve and Thickness Measurement of Soft Contact Lenses

High-Temperature Ultrasonic Testing

Hyperier® Barrier Material in Polyethylene Fuel Tanks

Measuring Elastic Modulus Using Thickness and Flaw Inspection Solutions

Measuring the Thickness of Automotive Air Bag Cover Tear Seams

Measuring the Thickness of Multilayer Plastic Food and Beverage Containers

Measuring the Wall Thickness of Small-Diameter Metal and Plastic Tubing

Thickness Measurement of Automotive Fuel Tanks

Thickness Measurement of Coextruded Cap Layers

Thickness Measurements of Polymer Aircraft Windshields

Ultrasonic time-of-flight-diffraction (TOFD) examination of butt-fusion joints of high-density polyethylene (HDPE)

Void Detection in Molded Plastic Parts

Wall Thickness Gauging in the Blow Molding Industry

Rubber

Measuring the Thickness of Rubber Tires

Thickness Measurements on Rubber Hoses and Tubing

Thickness Measurements on Rubber Sheets and Coatings

Thickness Testing of Reinforced Rubber Conveyor Belts

Steel

Corrosion Thickness Gauging with Dual Element Transducers

Guidelines for Automated Ultrasonic Inspection Austenitic Welds

Introduction to Time-of-Flight Diffraction (TOFD) for Weld Inspection

Measurement of the Layers in Clad Metal Cookware

Metal Coils Thickness Inspection

Normal Incidence Shear Wave Transducers

TOFD for Weld Root Corrosion and Erosion

TOFD Parallel Scanning

Ultrasonic Detection of Manufacturing Artifacts in New Pipe

Ultrasonic Inspection of Babbitt Bearing Liners

Ultrasonic Testing of Aluminum and Nonferrous Castings

Titanium

Normal Incidence Shear Wave Transducers

Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

Contact Us

Subscribe to the Evident email

Sorry, this page is not available in your country