Loading...

Przegląd

Ability to transmit and receive longitudinal waves in granular materials
Increased penetration in stainless steel, including austenitic, corrosion-resistant alloys, and dissimilar welds
Excellent signal-to-noise ratio
Higher frequencies and smaller elements provide benefits for applications requiring detection of very small indications

	A28 and A38 Dual Linear Array (DLA) Probes High-frequency probes (up to 10 MHz) for applications with high-sensitivity requirements (such as HTHA, creep damage, SOHIC) Dual 32 (A28) or 64 (A38) small-element arrays offer wide coverage with a short footprint Series of wedges to fit pipe diameters of 4.5 in. [114.3 mm] OD and larger Series of wedges with roof angles offering passive focusing for depths from 4 mm to 95 mm (0.16 in. to 3.74 in.) Compatible with the universal holder and the ChainSCANNER™, VersaMOUSE, HSMT-Compact, HSMT-Flex, AxSEAM™, WeldROVER™, MapROVER, and SteerROVER scanners

High-frequency probes (up to 10 MHz) for applications with high-sensitivity requirements (such as HTHA, creep damage, SOHIC)
Dual 32 (A28) or 64 (A38) small-element arrays offer wide coverage with a short footprint
Series of wedges to fit pipe diameters of 4.5 in. [114.3 mm] OD and larger
Series of wedges with roof angles offering passive focusing for depths from 4 mm to 95 mm (0.16 in. to 3.74 in.)
Compatible with the universal holder and the ChainSCANNER™, VersaMOUSE, HSMT-Compact, HSMT-Flex, AxSEAM™, WeldROVER™, MapROVER, and SteerROVER scanners

A26 and A36 Dual Linear Array (DLA) Probes Stainless steel weld applications (austenitic, dissimilar welds, cladding, etc.) Thick pipes (40 mm–80 mm [1.6 in.-3.1 in.]) with the A26 dual 32-element linear probe Extra-thick pipes (80 mm [3.1 in.] and up) with the A36 dual 64-element linear probe Series of wedges to fit pipe diameters of 8.625 in. [219 mm] OD and larger Compatible with the universal holder and ChainSCANNER and VersaMOUSE scanners

Stainless steel weld applications (austenitic, dissimilar welds, cladding, etc.)
Thick pipes (40 mm–80 mm [1.6 in.-3.1 in.]) with the A26 dual 32-element linear probe
Extra-thick pipes (80 mm [3.1 in.] and up) with the A36 dual 64-element linear probe
Series of wedges to fit pipe diameters of 8.625 in. [219 mm] OD and larger
Compatible with the universal holder and ChainSCANNER and VersaMOUSE scanners

	A27 32-Element (16×2) Dual Matrix Array Probe Stainless steel weld applications (austenitic, dissimilar welds, cladding, etc.) Mid-range pipe thicknesses Series of wedges to fit pipe diameters of 4.5 in. [114.3 mm] OD and larger Compatible with the universal holder and ChainSCANNER and VersaMOUSE scanners

Stainless steel weld applications (austenitic, dissimilar welds, cladding, etc.)
Mid-range pipe thicknesses
Series of wedges to fit pipe diameters of 4.5 in. [114.3 mm] OD and larger
Compatible with the universal holder and ChainSCANNER and VersaMOUSE scanners

A25 16-Element Dual Linear Array Probe Stainless steel weld applications (austenitic, dissimilar welds, cladding, etc.) Thin-walled pipes (passive focal depth of approx. 6 mm [0.23 in.]) Series of wedges to fit pipe diameters from 1 in. to 4.5 in. [25.4 mm to 114.3 mm] OD Compatible with the COBRA™ scanner

Stainless steel weld applications (austenitic, dissimilar welds, cladding, etc.)
Thin-walled pipes (passive focal depth of approx. 6 mm [0.23 in.])
Series of wedges to fit pipe diameters from 1 in. to 4.5 in. [25.4 mm to 114.3 mm] OD
Compatible with the COBRA™ scanner

Specifications