The NORTEC 500 Series, Olympus' newest eddy current flaw detectors incorporate a full range of features: internal balance coils, VGA output connector (for heads up displays, monitors, and projectors), and a USB interface for rapid information transfer. The NORTEC 500 also includes PowerLink™, for automatic probe recognition and program set-up.
The NORTEC 500 improves on previous NORTEC eddy current instruments and is available in four configurations. Each configuration includes USB port and increased resolution with reduced noise. Internal balance coils allow use of inexpensive absolute probes without the need for external balance coil adapters. A built-in preamp adds extra gain when needed for difficult tests. VGA output allows for the display to be projected or viewed on a standard computer screen.
The optional remote-null adapter adds convenience by allowing the probe to be nulled and the instrument screen erased from the probe.
Where weight is critical, the smaller battery lightens the instrument to 1.3 kg (2.9 lbs) while keeping the full VGA resolution and display size.
The NORTEC 500 delivers basic single frequency eddy current inspection including external outputs.
The NORTEC 500C adds digital conductivity and coating thickness measurement capability in addition to basic single frequency eddy current inspection.
The NORTEC 500S builds on the foundation of the N500C and adds the ability to use rotating scanners.
The NORTEC 500D adds dual frequency capabilities to all the functions of the N500S.
Not available Standard
Features
500
500C
500S
500D
Single Frequency Capabilities
Digital Conductivity
Coating Thickness Measurement
Rotating Scanner Suport
Spilt Screen Display
Dual Frequency Capabilities
Features
50 Hz - 12 MHz frequency range
Preamplifier (0 or 14dB)
Single Li-Ion battery. Choice of two battery configurations: 2.4 Ahr or 8.8 Ahr
Lightweight, 1.3 kg to 2.1 kg (2.9 lbs to 4.6 lbs) depending on battery
configuration
6.5" (165 mm) full VGA color LCD (640 x 480 resolution)
On-board storage of up to 200 programs
On-screen reference memory for go no/go applications
Internal balance loads for single coil probe support
Display Freeze to hold flaw signals
PowerLink™ technology - automatic probe recognition and instrument set-up
Foreign Object Debris (FOD) free case design
VGA output
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Not available 
Standard