두께 및 결함 검사 솔루션
Wedges for Angle Beam Probes
Loading...
개요
Advantages
- Available in standard refracted angles of 0°, 45°, 55°, and 60° in steel for angle-beam inspections from 30° to 70°, SW or LW
- Stainless steel screw receptacles provide a firm anchoring of probes to wedges.
- Lateral electronic scanning replaces the hand-skewing movement (with lateral wedges).
- The IHC wedge option can be ordered to improve the quality of the inspection: irrigation, mounting holes for the wedge holder to work with any Olympus scanner, and carbide pins to increase wear resistance.
- Wedges are designed to perform manual or automated scans.
- Custom wedges with specific refracted angles can be ordered; wedge shape and contour can also be customized.
사양
| Part Number | Probe Type |
Nominal Refracted Beam Angle
(in Steel) | Recommended Sweep (°) | Probe Orientation | Wedge Dimensions (mm) | ||||
| L | W | W* | H | ||||||
| SA00-0L | A00 | 0° LW | −30 to 30 | Normal | 16 | 12 | N/A | 12 | |
| SA00-N60S | A00 | 60° SW | 40 to 70 | Normal | 21 | 14 | N/A | 13 | |
| SA0-0L | A0 | 0° LW | −30 to 30 | Normal | 23 | 12 | N/A | 11 | |
| SA0-N60S | A0 | 60° SW | 40 to 70 | Normal | 32 | 18 | N/A | 21 | |
| SA1-0L | A1 | 0° LW | −30 to 30 | Normal | 29 | 30 | 30 | 20 | |
| SA1-N60S | A1 | 60° SW | 40 to 70 | Normal | 30 | 30 | 40 | 16 | |
| SA1-N60L | A1 | 60° LW | 40 to 70 | Normal | 28 | 30 | 40 | 21 | |
| SA2-0L | A2 | 0° LW | −30 to 30 | Normal | 65 | 30 | 40 | 20 | |
| SA2-N60L | A2 | 60° LW | 40 to 70 | Normal | 79 | 30 | 40 | 50 | |
| SA2-N55S | A2 | 55° SW | 40 to 70 | Normal | 69 | 30 | 40 | 43 | |
| SA3-0L | A3 | 0° LW | −30 to 30 | Normal | 38 | 37 | 50 | 20 | |
| SA3-N45S | A3 | 45° SW | 40 to 60 | Normal | 55 | 37 | 50 | 30 | |
| SA3-N45L | A3 | 45° LW | 30 to 60 | Normal | 55 | 37 | 50 | 49 | |
| SA3-N60S | A3 | 60° SW | 40 to 70 | Normal | 58 | 37 | 50 | 32 | |
| SA3-N60L | A3 | 60° LW | 40 to 70 | Normal | 53 | 37 | 50 | 40 | |
| SA4-0L | A4 | 0° LW | −30 to 30 | Normal | 59 | 47 | 55 | 20 | |
| SA4-N45S | A4 | 45° SW | 40 to 60 | Normal | 90 | 47 | 55 | 51 | |
| SA4-N45L | A4 | 45° LW | 30 to 60 | Normal | 88 | 47 | 55 | 85 | |
| SA4-N60S | A4 | 60° SW | 40 to 70 | Normal | 86 | 47 | 55 | 45 | |
| SA4-N60L | A4 | 60° LW | 40 to 70 | Normal | 83 | 47 | 55 | 68 | |
| SA5-0L | A5 | 0° LW | −30 to 30 | Normal | 38 | 45 | 55 | 20 | |
| SA5-N45S | A5 | 45° SW | 40 to 60 | Normal | 57 | 47 | 55 | 37 | |
| SA5-N60S | A5 | 60° SW | 40 to 70 | Normal | 46 | 43 | 55 | 25 | |
| SA5-N60L | A5 | 60° LW | 40 to 70 | Normal | 39 | 50 | 55 | 41 | |
| SA10-0L | A10 | 0° LW | −30 to 30 | Normal | 25 | 23 | 40 | 20 | |
| SA10-N55S | A10 | 55° SW | 40 to 70 | Normal | 23 | 23 | 40 | 14 | |
| SA10-N60L | A10 | 60° LW | 40 to 70 | Normal | 26 | 23 | 40 | 30 | |
| SA11-0L | A11 | 0° LW | −30 to 30 | Normal | 35 | 23 | 40 | 23 | |
| SA11-N55S | A11 | 55° SW | 40 to 70 | Normal | 41 | 23 | 40 | 29 | |
| SA11-N60L | A11 | 60° LW | 40 to 70 | Normal | 43 | 23 | 40 | 53 | |
| SA12-0L | A12 | 0° LW | −30 to 30 | Normal | 58 | 23 | 40 | 20 | |
| SA12-N55S | A12 | 55° SW | 40 to 70 | Normal | 73 | 23 | 40 | 45 | |
| SA12-N60L | A12 | 60° LW | 40 to 70 | Normal | 61 | 23 | 40 | 53 | |
| SA14-0L | A14 | 0° LW | −30 to 30 | Normal | 80 | 23 | 40 | 20 | |
| SA14-N55S | A14 | 55° SW | 40 to 70 | Normal | 96 | 23 | 40 | 49 | |
| SA15-N60S | A15 | 60° LW | 40 to 70 | Normal | 18 | 22 | N/A | 12 | |
| SA16-N55S | A16 | 55° SW | 40 to 70 | Normal | 85 | 31 | 40 | 44 | |
| SA31-0L | A31 | 0° LW | -30 to 30 | Normal | 40 | 30 | 40 | 20 | |
| SA31-N55S | A31 | 55° SW | 40 to 70 | Normal | 49 | 30 | 40 | 32 | |
| SA31-N60L | A31 | 60° LW | 40 to 70 | Normal | 39 | 30 | 40 | 31 | |
| SA32-0L | A32 | 0° LW | -30 to 30 | Normal | 50 | 30 | 40 | 20 | |
| SA32-N55S | A32 | 55° SW | 40 to 70 | Normal | 62 | 30 | 40 | 33 | |
| SA32-N60L | A32 | 60° LW | 40 to 70 | Normal | 56 | 30 | 40 | 43 | |
| SAWS1-N60S | AWS1 | 60° SW | 40 to 70 | Normal | 45 | 38 | N/A | 32 | |
| SAWS1-0L | AWS1 | 0° LW | -30 to 30 | Normal | 38 | 38 | N/A | 40 | |
| SNW1-0L | NW1 | 0° LW | N/A | Normal | 66 | 32 | 32 | 22 | |
| SNW1-0L-AQ25 | NW1 | 0° LW | N/A | Normal | 71 | 40 | 40 | 37 | |
| SNW1-0L-AQ25-WR | NW1 | 0° LW | N/A | Normal | 93 | 40 | 40 | 39 | |
| SNW1-0L-IHC-C | NW1 | 0° LW | N/A | Normal | 66 | 32 | 32 | 22 | |
| SNW2-0L | NW2 | 0° LW | N/A | Normal | 26 | 32 | 32 | 22 | |
| SNW2-0L-AQ25 | NW1 | 0° LW | N/A | Normal | 31 | 40 | 40 | 37 | |
| SNW2-0L-AQ25-WR | NW1 | 0° LW | N/A | Normal | 53 | 40 | 40 | 39 | |
| SNW3-0L | NW3 | 0° LW | N/A | Normal | 130 | 32 | 32 | 22 | |
| SNW3-0L-AQ25 | NW1 | 0° LW | N/A | Normal | 135 | 40 | 40 | 37 | |
| SNW3-0L-AQ25-WR | NW1 | 0° LW | N/A | Normal | 157 | 40 | 40 | 39 | |
| SPWZ1-0L | PWZ1 | 0° LW | -30 to 30 | Normal | 75 | 30 | 40 | 20 | |
| SPWZ1-N55S | PWZ1 | 55° SW | 40 to 70 | Normal | 87 | 30 | 40 | 45 | |
| SPWZ3-0L | PWZ3 | 0° LW | -30 to 30 | Normal | 40 | 30 | 40 | 20 | |
| SPWZ3-N55S | PWZ3 | 55° SW | 40 to 70 | Normal | 65 | 30 | 40 | 38 | |
| SPWZ3-N60L | PWZ3 | 60° LW | 40 to 70 | Normal | 64 | 30 | 40 | 35 | |
| * Width with IHC wedge option | |||||||||
Standard Wedge Curvature Values
|
External Pipe Diameter
in. | Curvature Range | ||
|
Minimum
mm (in.) |
Maximum
mm (in.) | ||
| Wedge Type: SA1, SA2, SA3, SA4, SA5, SPWZ1, SPWZ3, SI1, SI2, SI3 | |||
| 2 | 45.7 (1.8) | 50.8 (2) | |
| 2.25 | 50.8 (2) | 57.1 (2.25) | |
| 2.5 | 57.1 (2.25) | 63.5 (2.5) | |
| 3 | 63.5 (2.5) | 76.2 (3) | |
| 3.25 | 76.2 (3) | 82.5 (3.25) | |
| 3.5 | 82.5 (3.25) | 88.9 (3.5) | |
| 4 | 88.9 (3.5) | 101.6 (4) | |
| 4.5 | 101.6 (4) | 114.3 (4.5) | |
| 5 | 114.3 (4.5) | 127.0 (5) | |
| 6 | 127.0 (5) | 152.4 (6) | |
| 7 | 152.4 (6) | 177.8 (7) | |
| 8 | 177.8 (7) | 203.2 (8) | |
| 10 | 203.2 (8) | 254.0 (10) | |
| 12 | 254.0 (10) | 304.8 (12) | |
| 16 | 304.8 (12) | 406.4 (16) | |
| 22 | 406.4 (16) | 555.8 (22) | |
| 30 | 558.8 (22) | 762.0 (30) | |
| Flat | 762.0 (30) | up to flat | |
| Wedge Type: SA10*, SA11*, SA12*, SA14*, SA31, SA32 | |||
| 2.375 | 50.8 (2) | 60.3 (2.375) | |
| 2.875 | 60.3 (2.375) | 73.0 (2.875) | |
| 3.5 | 73.0 (2.875) | 88.9 (3.5) | |
| 4 | 88.9 (3.5) | 101.6 (4) | |
| 4.5 | 101.6 (4) | 114.3 (4.5) | |
| 5.563 | 114.3 (4.5) | 141.3 (5.563) | |
| 6.625 | 141.3 (5.563) | 168.3 (6.625) | |
| 8.625 | 168.3 (6.625) | 219.0 (8.625) | |
| 10.75 | 219.0 (8.625) | 273.0 (10.75) | |
| 12.75 | 273.0 (10.75) | 323.8 (12.75) | |
| 16 | 323.8 (12.75) | 406.4 (16) | |
| 24 | 406.4 (16) | 609.6 (24) | |
| Flat | 609.6 (24) | up to flat | |
| Wedge Type: ST and SPE | |||
| 2 | 44.4 (1.75) | 50.8 (2) | |
| 2.25 | 50.8 (2) | 51.7 (2.25) | |
| 2.5 | 57.1 (2.25) | 63.5 (2.5) | |
| 3 | 63.5 (2.5) | 76.2 (3) | |
| 3.5 | 76.2 (3) | 88.9 (3.5) | |
| 4 | 88.9 (3.5) | 101.6 (4) | |
| 5 | 101.6 (4) | 127.0 (5) | |
| 6 | 127.0 (5) | 152.4 (6) | |
| 8 | 152.4 (6) | 203.2 (8) | |
| 12 | 203.2 (8) | 304.8 (12) | |
| 16 | 304.8 (12) | 406.4 (16) | |
| 22 | 406.4 (16) | 558.8 (22) | |
| Flat | 555.8 (22) | up to flat | |
| * Below 4 in., IHC are integrated in the Rexolite and wedges are not compatible with IHC rings. Flat wedge can be used for pipes greater than 12.75 in. OD. | |||
Options
Wedge Offset Parameters
How to Find the Wedge Parameters
- Find the appropriate wedge in either the OmniScan or TomoView Wedge Database. Parameters are automatically set once the wedge model is chosen.
- If the wedge is not already in the database, you may download the latest database update from the Service & Support section of www.olympus-ims.com.
- Enter the parameters manually using the values provided on the Wedge Specification Sheet accompanying the wedge.
- Call your local sales representative.
Wedge Curvature Conventions
| Wedge parameters with OmniScan | |
| X | Primary offset |
| Y | Secondary offset (0 when probe is centered) |
| Z | Height |
| Wedge parameters with TomoView | |
| X T | Primary axis offset of the middle of the first element (mm) |
| Y | Secondary axis offset of the middle of the first element (mm) (measured from the side of the wedge) |
| Z | Height at the middle of the first element (mm) |
죄송합니다. 이 페이지는 해당 국가에서 사용할 수 없습니다.
아래 양식을 작성하여 원하는 내용을 알려주십시오.