The eddy current flexible probes offer solid stainless steel construction for durability and titanium protective cover for the coils. They are designed to inspect tight U-bend (as low as 50 mm curvature radius).
Recommendations
TEG probes are designed to inspect tight U-bends with radius of curvatures as low as 51 mm (2 in.). These probes are designed to inspect one half of the U-bend (90°) from each side of the tube.
Features
Solid stainless steel construction for durability.
Titanium protective cover for coils.
Tight U-bend capability (with curvature radius as low as 50 mm [2 in.]).
Standard/Custom Probes (Made to Order)
Use the nomenclature and the chart below to configure your part number.
Tube curvature and radius
TEG inspects tubes with a maximum of 90º bend one side a time. Minimum radius is 51 mm.
Probe Type
Probe Diameter
(use mm in part ID)
Center Frequency
Cable Length**
mm
in.
TEG: Flexible bullet
Standard
11 mm to 25.4 mm
by 0.2 mm
Standard
0.433 in. to 1.000 in.
by 0.008 in.
015 (Low)
050 (Mid)
250 (High)
600 (Very High)
25 m (80 ft)
N = Nylon
H = More flexible
**Information on cables for TEG probes with superior flexibility is available in the Tube Inspection Probe Catalog.
