Immersion Special
Immersion special transducers refer to a variety of transducers that conduct many specific applications such as measuring wall thickness, inspection of aluminum plating, or multi-element array flaw detection.This group contains the following transducer types: side looking case, paintbrush, i-R style and XMS.
Side Looking Case
Side Looking Immersion Transducers
- Ideal for measuring wall thicknesses of pipe where access to the outer diameter is limited
- Small outer diameter allows for greater accessibility in tight spaces than standard immersion transducers with reflector mirrors
- Sound exit point is located at a 90° angle relative to the straight Microdot ® connector
- Probe extensions such as the F211 are available to lengthen the standard design
Part
Numbers |
Freq.
|
Nominal
Element Size |
Focus
| |
MHz
|
inches
|
mm
| inches | |
| V3591 |
10
|
0.125
|
3
| 0.50 OLF |
| V3343 |
20
|
0.125
|
3
| 0.50 OLF |
Note: All above side looking immersion transducers have straight Microdot connectors.
Paintbrush
Accuscan Paintbrush
| Transducer Dimensions (in inches)
For 7.5 MHz and 10 MHz, case height (A) is 0.62" |
Transducer Configurator
*Please select a specific focus between min max.
**If a focus is required, select a focal length between min max
To view point target foci, click here.
Request a quote or purchase a transducer by selecting the item number.
| Frequency (MHz) | Nominal Element Size | ACCUSCAN-S | ||||
|---|---|---|---|---|---|---|
| in. | mm | Part / Item No. | ||||
| 2.25 | 2.00 x 0.25 | 51 x 6 | A340S-SUU8421045
| |||
XMS
Extra Miniature (XMS) Transducer
The XMS transducer is an extremely small 10 MHz immersion transducer with a 3 mm (0.118") diameter by 3 mm (0.118") long case. This transducer is ideal for extremely tight access areas or for multi-element array flaw detection. The transducer assembly has a special connector attached to the 1 m (38") long potted cable. An adaptor is also available to interface with most commercial ultrasonic equipment.
| Frequency |
Nominal Element Size
| Part Number | Included Adapter | |
| MHz | inches | mm | ||
| 10 | .080 | 2 | XMS-310-B | BNC |
| 10 | .080 | 2 | XMS-310-L | Lemo ® 01 |
i-R Style
i-R Style Housings0.50 inches (10 mm) element diameters in 0.75 inches (19 mm) x 0.75 inches (19 mm) rectangular housings with side mount (right angle), UHF connectors, and 303 stainless steel case housings are available. Transducer Configurator*To view transducer point target focus, click here. |
