Thickness Measurements of Fiberglass Plates, Pipes, and Storage Tanks
Ultrasonic thickness gauges can be used for a variety of fiberglass applications measuring parts from one side. For example, inspectors can use ultrasonic gauges to check fiberglass storage tanks and pipes as part of the manufacturing process and in service to assure that no erosion or delamination from corrosive chemicals has resulted. Other fiberglass thickness
applications include hot tubs, electronic circuit boards, coil bobbins, and sporting equipment. Ultrasonic gauges can be used on many types of fiberglass: cloth, mat, roving, filament wound, or combinations of these.
Ultrasonic Equipment Used for Fiberglass Thickness Measurements
Fiberglass measurements are normally performed with precision thickness gauges, such as the 39DL PLUS™ gauge or 45MG gauge with the High Penetration software option. Transducer selection and setup depend on the desired thickness range capability and quality of the composite material. A typical measurement range is from 0.05 to 3 in. (1.25 to 75 mm) using the specialized 0.5 MHz M2008 fiberglass transducer for thicker parts. Other transducers
such as the M1036 (2.25 MHz) or M109 (5 MHz) are used for thicknesses under 0.5 in. (12.5 mm).
The 39DL PLUS™ gauge is field-proven and reliable for virtually every ultrasonic thickness inspection. It works as a precision or corrosion thickness gauge to meet the challenges of demanding applications across industries, including maintenance, manufacturing, and energy production. With world-class ultrasonic capability, fast scanning speeds, and fully integrated wireless connectivity, this handheld gauge delivers results you can trust in a seamless workflow.
The 72DL PLUS™ advanced ultrasonic thickness gauge delivers precision thickness measurements at high speed in a portable, easy-to-use device. Compatible with single element transducers up to 125 MHz, this innovative instrument is ideally suited to measure the thickness of ultra-thin materials, including multilayer paint, coatings, and plastic. It can simultaneously display the thickness of up to 6 layers.
Zaawansowany grubościomierz ultradźwiękowy 45MG dostępny jest ze standardowymi funkcjami pomiarowymi oraz z opcjami oprogramowania. Ten unikalny przyrząd jest kompatybilny z całą gamą głowic jedno- i dwuprzetwornikowych do pomiaru grubości firmy Olympus.
Sorry, this page is not available in your country
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Ultrasonic thickness gauges can be used for a variety of fiberglass applications measuring parts from one side. For example, inspectors can use ultrasonic gauges to check fiberglass storage tanks and pipes as part of the manufacturing process and in service to assure that no erosion or delamination from corrosive chemicals has resulted. Other fiberglass thickness
applications include hot tubs, electronic circuit boards, coil bobbins, and sporting equipment. Ultrasonic gauges can be used on many types of fiberglass: cloth, mat, roving, filament wound, or combinations of these.
