Dane techniczne

System Specifications
Size	Full scanner with handles	577 mm × 578 mm × 210 mm (22.7 in. × 22.7 in. × 8.3 in.)
Size	Acquisition unit	243 mm × 188 mm × 100 mm (9.6 in. × 7.4 in. × 3.9 in.)
Weight	Full scanner with handles	18 kg (40 lb)
Weight	Acquisition unit	4.8 kg (10.6 lb)
Pipe Diameter Range	From 168 mm (6.625 in.) to 1524 mm (60 in.)
Maximum Scanning Speed	100 mm/s (3.9 in./s)
Environment	Storage temperature	−30°C to 60°C (−22°F to 140°F)
	Operating Temperature	−30°C to 50°C (−22°F to 122°F)
	Max relative humidity	90% noncondensing
	Pollution degree (level)	4
	Altitude	Up to 2000 m (6561 ft)
	IP rating	IP65
	Installation category	III
Ethernet Connectivity	Ethernet interface	1000BASE-T (bandwidth of 1000 Mbps)
	Cable length	30 m max. (100 ft)
	Cable type	Category 5e or higher, shielded
	Transfer rate on Ethernet cable	940 Mbps max.
	Connector	Female RJ-45, shielded
DC Power Requirements	Voltage	24 VDC ±5%
DC Power Requirements	Max. power consumption	360 W
System	Warm-up time	None
Probe Connectors	2 phased array (IPEX) and 10 conventional UT (LEMO)
Positioning System	External GPS (optional)
Temperature Sensor	Thermocouple for wedge temperature monitoring
Techniques	Zone discrimination, PA, TOFD, UT
Techniques	TFM, PWI, PCI (hardware ready, software features in dev.)

Pulser Specifications
Parameter	PA	UT
Number of Focal Laws	1024	N/A
Pulse Output (into a 50 Ω) ±10%	5, 10 , 20, 40, 60, 80, 90 volts peak-to-peak (Vpp) for a bipolar pulse
Pulse Output (in High Impedance) ±10%	7.8, 15.6, 31, 62, 93, 124, 140 Vpp for a bipolar pulse
Number of Pulsers	64:256PR with parallel firing	10
Number of Elements	256	N/A
UT Channels	N/A	P/E: up to 10 and P/C: up to 5
Pulse Width/Step (Precision of 5 ns or ±10%)	30 ns to 1000 ns (steps of 5 ns)
Fall Time	15 ns for a 40 Vpp bipolar pulse
Pulse Shape	Bipolar, positive, and negative square pulse
Output Impedance	25 Ω	39 Ω

Receiver Specifications
Parameter	PA	UT
Gain Range/Increment	0 dB to 80 dB (44 dB analog + 36 dB digital)
Gain Resolution	0.1 dB
Maximum Input Signal	P/E & P/C: 1.15 Vpp	P/E & P/C: 1.04 Vpp
Input Impedance	P/E: 59Ω ±10%; P/C: 69Ω ±10%	P/E & P/C: 132 Ω ±10%
Gain Precision between Channels (at 20 dB)	0.5 dB	0.1 dB
Crosstalk Isolation between Channels	>46 dB at 5 MHz	>67 dB at 5 MHz
System Bandwidth (−3 dB) ±10%	0.68 MHz to 22.3 MHz

Data Specifications
Elementary A/D Converter	PA: 14 bits, 120 MSPS; UT: 14 bits, 120 MSPS
Digitizing Frequency	100 MHz
Amplitude Resolution	8 bits / 16 bits
A-Scan Height	Up to 800%
Global Data Throughput	Up to 90 MB/s
Maximum Pulse Repetition Frequency (PRF)	25 kHz
Maximum Number of A-Scan Samples	16380
Acquisition Depth	163.8 µs without compression
Compression	1 to 2000
Averaging	1, 2, 4, 8, 16, 32, 64
Rectifier	RF/FW/HW+/HW−
Digital Filtering	Low-pass: 2, 4, 7.45 MHz Band-pass: 2 (1–3.5), 4 (2–6.5), 5 (2.5–8), 8 (4–12), 10 (5–16), 12 (6–18) MHz High-pass: 4, 6, 8, 10 MHz

Certifications
EMC	EN IEC 61326-1:2021, EN 61000-3-2:2014, EN 61000-3-3:2013 USA: FCC 47 CFR Part 15, Subpart B – Verification Canada : ICES-001 Issue 5 July 2020
GPS	ETSI EN 301 489-19 V2.2.1 (2022-09)
Phased Array	ISO-18563-1 (2015)

Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.