Rozwiązania dla przemysłu
Defektoskopy
Sondy uniwersalne
Loading...
Przegląd
The universal probes are designed to have a low-profile probe/wedge combination for easier access in restricted areas. A wide selection of wedges is available to suit any angle beam application. These probes are used for manual or automated inspection of 6.35 mm to 38 mm thick welds and the inspections of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects.
Advantages
| Typical ApplicationsA10, A11, and A12 Probes
|
Probe Specifications and Dimensions
| Part Number | Item Number |
Frequency
(MHz) | Number of Elements |
Pitch
(mm) |
Active Aperture
(mm) |
Elevation
(mm) |
External Dimensions
mm (in.) | ||
| L | W | H | |||||||
| 5L16-A10 | U8330595 | 5.0 | 16 | 0.60 | 9.6 | 10.0 | 23 (0.91) | 16 (0.63) | 20 (0.79) |
| 10L32-A10 | U8330251 | 10.0 | 32 | 0.31 | 9.9 | 7.0 | 23 (0.91) | 16 (0.63) | 20 (0.79) |
| 5L32-A11 | U8330274 | 5.0 | 32 | 0.60 | 19.2 | 10.0 | 25 (0.98) | 23 (0.91) | 20 (0.79) |
| 5L64-A12 | U8330593 | 5.0 | 64 | 0.60 | 38.4 | 10.0 | 45 (1.77) | 23 (0.91) | 20 (0.79) |
| 5L60-A14 | U8330785 | 5.0 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 23 (0.91) | 20 (0.79) |
| 7.5L60-A14 | U8330804 | 7.5 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 23 (0.91) | 20 (0.79) |
| These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths. | |||||||||
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.