Defektoskopy
Specification
|
Standard Product Range
|
Diameter
|
60.3 mm to 508 mm OD (2.37 in. to 20 in. OD)
|
|---|
|
Wall Thickness
|
4 mm to 50.8 m (0.157 in to 2 in.)
|
|---|
|
Speed
|
Conventional UT: 4 mm/s to 60 mm/s Phased array: 10 mm/s to 120 mm/s
|
|---|
|
Coverage
|
100% coverage with untested length starting at 5 mm
EOT inspection length can be configured according to requirements
|
|---|
|
Data Presentation
|
Real-Time Inspection Results
|
C-scan, A-scan, B-scan, strip charts, and alarms
|
|---|
|
Inspection Modes
|
Typical Inspection Modes
|
Longitudinal, transverse, and lamination defects
|
|---|
|
Detection Capabilities for Typical Reference Defects
|
Repeatability
|
L, T notches: <2.5 dB, TDH 3.2 mm (0.13 in.) and TDH 1.6 mm (0.06 in.): <3 dbB, FBH 6.35 mm (0.25 in.): <4 dB
|
|---|
|
Standards
|
ISO and API
|
|---|
|
Reporting and Data Storage
|
Report Types
|
Inspection, calibration, and calibration-check user-configurable reports
|
|---|
|
Storage
|
Real-time database inspection data storage
|
|---|
|
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Redirecting
You are being redirected to our local site.
Sorry, this page is not available in your country
