Railway transport continues to play an important role in the transportation industry; due in large part to its speed, reliability, and affordability. To maintain this viability, ensuring train safety and integrity is key. Stringent regulations are imposed on the inspection of train wheels and axles in both the manufacturing and service sectors. To meet and exceed these strict criteria, Olympus provides the power and flexibility of its FOCUS LT/TomoView package to experienced and knowledgeable integrators, who are then able to deliver fully code-compliant inspection systems.
Photo Courtesy of DTEC GmbH Germany
Manufacturing Inspection
Requirements
Radial Defects:
2.0 mm FBH for high speed train wheels.
3.2 mm FBH for freight train wheels.
Various depths from tread surface.
Axial Defects:
2.0 mm FBH for high speed train wheels.
3.2 mm FBH for freight train wheels.
Various depths from rim surface.
Code Compliance
EN 13262
ISO 5948
AFNOR 09-340
Performance
Inspection time down to 30 s/wheel for freight train wheels.
Complete thread and rim areas coverage.
Inspection time down to 3 min./wheel for high speed train wheels.
In-depth thread, rim, hub and flange coverage.
In-Service Inspection
Requirements
Radial Defects:
1.0 mm FBH for high speed train wheels.
2.0 to 3.2 mm FBH for freight train wheels.
Various depths from tread surface.
Axial Defects:
3.0 or 5.0 mm FBH in the web section.
Up to 3 defects at different depths.
Code Compliance
ESR 0331
EN 13262
AAR M107-84
Performance
Inspection time down to 30 s/wheel for freight train wheels.
Complete thread and rim areas coverage.
Inspection time down to 3 min./wheel for high speed train wheels.
In-depth thread, rim, hub, and flange coverage.
Optional High Speed Train Inspection Requirements
Multizone Coverage
Specific code requirements subdivide the rim area into zones requiring additional coverage.
Sub Bore-Hole Area Inspection
Some codes require the inspection of the area under the bore holes, which is achieved with a Pitch-Catch configuration.
High-Performance Package
Experience the power of the FOCUS LT acquisition unit, the flexibility of the TomoView software, and the customization capability provided by the software development kits (SDK). These three components work in unison to maximize the performance of train wheel inspection systems.
TomoScan FOCUS LT Specifications
Dynamic Depth Focusing
Improved defect resolution in the thread and rim areas
Multipod
Scalable electronics for simultaneous full wheelset inspection and greatly reduced inspection time
Interface Tracking Feature
Precise A-scan data, even for wheels with rough surfaces.
Presynchronization Capability
Greatly improved near-backwall defects detection in the rim fillet area.
Scalability
Use 1, 2, or 3 FOCUS LT acquisition units to match the expected system productivity.
Enhanced multiprobe capability for simultaneous full wheelset inspection.
Up to a threefold increase in inspection speed for reduced inspection time per wheelset.
Automation and Customization
Fully automate your inspection system to reduce the cycle time per wheel and enhance detectability.
Customizable User Interface
Create your own specially designed user interface that optimizes and streamlines your system’s performance.
TomoView and SDK Features
Advanced multiprobe and multigroup management for in-depth thread, rim, hub, and flange coverage.
Dedicated user interface based on train wheel inspection requirements.
Live data retrieval capability for customized external data presentation and processing.
Fully automated and operator-free inspection systems using the SDKs.
O transporte ferroviário continua a desempenhar um papel importante no setor de transportes, em grande parte isso se deve à sua velocidade, confiabilidade e acessibilidade. Para manter-se viável, garantir a segurança e a integridade dos trens é imprescindível. Normas rigorosas são impostas para a inspeção de rodas e de eixos de trens, tanto nos setores de serviço como no de produção. Para atender e ultrapassar esses critérios rigorosos a Olympus oferece o pacote FOCUS PX/PC, poderoso e flexível, para integradores experientes e proficientes que são capazes de entregar sistemas de inspeção completamente compatíveis com as normas.
A unidade de aquisição FOCUS PX escalonável e o software FocusPC incorporam as tecnologias mais recentes de Phased Array e ultrassom convencionais para fácil integração em sistemas automatizados e semiautomáticos. O FOCUS PX e a capacidade de seu software de gerar e salvar dados brutos de C-scan e A-scan os tornam a escolha perfeita para aplicativos em que o veredicto da inspeção é baseado na análise de dados pós-inspeção. Isso inclui aplicações em indústrias como a aeroespacial (laminado de compósito), a de geração de energia (pás eólicas), a de transporte (rodas de trem), a de metal (peças forjadas) e muitas outras.
FocusControl, FocusData e kits de desenvolvimento de software (SDKs) opcionais são compatíveis com a unidade FOCUS PX para que os clientes possam desenvolver seu próprio software de aplicação.
Desculpe, esta página não está disponível no seu país
Desculpe, esta página não está disponível no seu país
Diga-nos o que você está procurando preenchendo o formulário abaixo.
