Latest: IPLEX G Lite/G Lite-W Software Update – v1.40

This program updates the IPLEX Lite/G Lite-W software to v. 1.40.

Supported software version

v. 1.00 / v. 1.10 / v. 1.11 / v. 1.20 / v. 1.30

New features and changes of this program

Below are the new features and changes included in this program:

1. Supports secure wireless data transfer using the IPLEX desktop app.

• IPLEX G Lite/G Lite-W must be equipped with the recommended USB wireless LAN adapter.

Before installing the software

1. Please read the Software License Agreement carefully before downloading the software. Downloading the software constitutes acceptance of the agreement.

2. Please make sure you have the following before you begin the software update:

• IPLEX G Lite/G Lite-W videoscope with AC adapter
• SDHC memory card (Note: USB drive cannot be used for this update)
• Computer with SDHC memory card port or SDHC to USB adapter

Downloading the software

1. Select the file you want to download from the bottom of the page.

2. When the entry form is displayed, enter the requested information.

3. Press the [Download the file] button to begin downloading.

4. When the [Download the file] dialog appears, press the [Save] button to download the software to your PC’s internal storage.

5. The downloaded file is a compressed ZIP format. Please decompress the file to any folder.

Update IPLEX G Lite/G Lite-W software to v. 1.40

1. Connect the SDHC memory card to a computer.

2. In the root directory, create a new folder called “UPDATE.”

3. Copy all the unzipped files into the “UPDATE” folder.

4. Connect your IPLEX G Lite/G Lite-W to the AC adapter.

5. While the videoscope is powered OFF, insert the SDHC memory card from step 1 above into the videoscope.

6. Power ON the videoscope.
Attention: The videoscope must have continuous power from the AC power to prevent accidental shut down during the update.

7. The update process will start automatically.

8. When the message “UPDATED!!” appears at the bottom of the blue startup screen, power OFF the videoscope.

9. Using your computer, delete the folder named “UPDATE” on the SDHC memory card using the computer to prevent automatic activation again.

10. Go to Menu > System Setup > Version to confirm that software version has been successfully installed